Support VigorACS 2.
Corrected: Router reboot while using the domain name on Syslog server address.
Corrected: Router reboot while SMB traffic passed through PPTP/L2TP VPN tunnel.
Corrected: IP Filter with direction "LAN/RT/VPN->LAN/RT/VPN" didn't work.
Corrected: DNSSEC caused router reboot.
Corrected: Isolate VPN option could not be saved in the wireless 2.4G web.
Corrected: TR-069 Port set with 8069 was opened regardless of Access List.
Corrected: LAN DNS case sensitive.
Corrected: Router stopped sending Syslog into USB disk.
Corrected: NAT loopback issue with IP Alias.
Improved: Support DHCP relay for the remote dial-in user.
File and Modem Code
For DSL models, there will be five folders: STD, VECTOR1, VECTOR2, VECTOR3 and
VECTOR4. The files in VECTOR named folder implement a new DSL driver, which supports
G.Vectoring on VDSL. If you're using a VDSL line, VECTOR named firmware may bring out better
performance; however, please consult your ISP to check if G.Vectoring is required. We also provide
two versions of modem codes to avoid the interoperability issue. You could just try the other one if
the one you use cannot synchronize or get the speed that you expected. Available modem codes for
Annex A/Annex B are displayed as follows:
For Annex A Model,
"Vigor2860_v188.8.131.52-00_en.zip" is used for modem code 548006_544401 &
- 2 -
Vigor2860_v184.108.40.206-01v_en.zip" is used for modem code 567517_562301 &
Vigor2860_v220.127.116.11-02v_en.zip" is used for modem code 574307_571801 &
Vigor2860_v18.104.22.168-03v_en.zip" is used for modem code 576d17_572801 &
Vigor2860_v22.214.171.124-04v_en.zip" is used for modem code 579c17_573f01 &
For Annex B Model,
"Vigor2860_v126.96.36.199-00_en.zip" is used for modem code 548006_544512 &
"Vigor2860_v188.8.131.52-01v_en.zip" is used for modem code 565607_567002 &
"Vigor2860_v184.108.40.206-02v_en.zip" is used for modem code 573307_571c02 &
Vigor router will fail to send multiple papers/files from Phone1 to Phone 2 with FAX
Wireless connection will be disabled automatically if there is no internet access.
Add schedule mechanism to re-select wireless channel.
Support WDS link for 5GHz Wi-Fi connection.
Support TLS 1.2.
Support USB thermometer - TEMPer1F_V1.3 / TEMPerX232.
Add parameters required for being managed by VigorACS 2.
Improved: Wireless connection will be kept for client while adding/removing MAC
Address in Access Control.
Improved: Change the mechanism and the layout of the System
Maintenance>>Configuration Backup page.
Improved: Display the device name on the browser tab of web user interface.
Improved: Improvement for Wi-Fi channel recommendation.
Improved: Support overnight schedule in single profile.
Corrected: The "FAQ/Application Note" URL link led to old official website.
Corrected: While configuring Universal Repeater mode for 5GHz by quick start wizard,
the channel setting did not change according to the SSID selected from AP Discovery.
Corrected: Error occurred after changing the Channel Width in Wireless LAN (5G)
Improved: Device Name in System Maintenance>>Management is allowed to be set
with longer than 15 characters.
Corrected: LAN's LED was disabled at first. Later, change the setting of LED function to
enable. Yet, the LAN’s LED would not light.
- 2 -
Corrected: Couldn’t Enable AP Monitor Mode in AP Discovery page.
Corrected: Internet access problems occurred when VLAN tag and Isolate Member were
enabled on SSID.
Improved: Isolate member feature did not work.
Corrected: Speed test (Diagnostics >> Speed Test) caused reboot of VigorAP.
Corrected: Wi-Fi Management probe response country code was always FR.