Use the Router as an SMB Server

SMB service is a feature for file sharing. This document demonstrates how to make Vigor Router be an SMB server, and allow the LAN clients to access the files in the USB drive connected to the router's USB port.

Router Configuration 

1. Insert a USB drive to router's USB port, and go to USB Application >> USB Devices Status to make sure the device is detected. (For the USB drive, we recommend file system FAT32, partition size no larger than 500 GB, and a single file not larger than 4 GB.)

a screenshot of DrayOS USB Status

2. Go to USB Application >> USB General Settings to enable SMB Service Settings and set other details. After that, the router will ask for a reboot to make the changes to take effect.

a screenshot of DrayOS USB General Settings

3. To create a user accounts for the SMB service, go to USB Application >> USB User Management, click on a profile index to add/edit the profile:

  1. Enable FTP/SMB User
  2. Enter Username and Password, and confirm the password again.
  3. Assign a Home Folder to which the users can access. We may click on the folder icon to select or create a folder in the USB drive, or just enter “/” if we would like to provide access to all the folders.
  4. Set the Access Rule for the users.
  5. Click OK to save the profile.
a screenshot of DrayOS USB User Management
Access the files from LAN

With the configuration above, the router will act as an SMB server, and the LAN clients will be able to access the files in the USB drive. There are several operating systems and APPs that can work with Vigor SMB Service and be an SMB client, here we take Windows users for example.

1. Open Network on the PC, and we will see a computer with hostname “VIGOR”. (You can change the hostname at USB Application >> USB General Settings.)

a screenshot of Windows Network

If you do not see Vigor Router on the network, you may also try accessing the router by input " \\ " with the router's LAN IP in the address bar, e.g., \\192.168.1.1.

a screenshot of Windows Network

2. Double click on the hostname, and it should pop up a window for network credentials. Enter the username and password set at USB Application >> USB User Management.

a screenshot of Windows Network

3. If logged in successfully, LAN clients will be able to access the folders and files in the USB drive.

 

4. On the router, from USB Application >> USB Device Status page, the network administrator can check the users that have logged in.

a screenshot of DrayOS USB Device Statu

Published On:2015-12-09 

Was this helpful?   

book icon

Related Articles